2 multi-color leds and 2 push buttons for status, configuration and binding
Flash memory for Firmware upgrade via USB of RF • Auto ventilation
Zoning in a ventilation system means that two zones
(sleeping zone and living zone) can be ventilated indepen-dently of each other, based on CO2 concentrations. If the CO2 concentration is higher than the set target value for the zone in question, the ventilation in that zone is increased.
The zoning PCB gives you the opportunity to extend your products with zoning and is intended to support zoning with 2 dry zones supply air. It receives signals from the wireless sensors to determine the ventilation needs of a zone.
The zoning PCB supports 5V,12V or 24V stepper with a max power of 4W. It is intended for a unipolar, 4-coil stepper motor.
The PCB communicates via RF with the Airios VMD and the Airios VMS sensors.
CO2 sensor (either CO2 or VOC, not both)
VOC sensor (either CO2 or VOC, not both)
Differential pressure sensor
VALVESCONTROL FOR ZONING
OTHER PLATFORM PRODUCTS
FOR RESIDENTIAL VENTILATION
Mechanical extraction controller PCB
To integrate in a single fan system for control of the fan wired or wireless
Digital input/output module
To connect wired applications to the wireless world Passive Infra-Red motion detector
Passive Infra-Red motion detector
Flush mounted motion detector to switch on ventilation and light
RS485 to RF interface
Connect your RS485 product/building control system to the wireless world. Support of many RF products for heating and ventilation
Ethernet to RF interface
Connect the wireless ventilation and heating world to the outside world for new business applications - Use to program devices in production
On wall or flush mounted CO2, humidity and temperature sensor for your system
User interface without display (possible flush mount
Simple high quality and flexible solution
User interface with display (possible flush mount)
A user interface to control and adapt the heat recovery PCB
App and cloud solution
Open up new business opportunities